Stretch Film Recycling for Australian Warehouses
A practical guide to collecting clean commercial stretch film, checking local recyclers and avoiding unsupported recycling claims.

Used pallet wrap is light, bulky and easy to contaminate. That combination makes a recycling program look simple on a poster but difficult at the loading dock. The workable approach is to confirm an outlet first, then design collection around that recycler’s acceptance rules.
Do not place commercial hand stretch film into a household soft-plastics scheme unless the program explicitly accepts material from your business. Services and rules differ by location and can change.
Start with the recycler, not the bin
Ask a local commercial plastics collector or reprocessor:
- which polymer and film grades are accepted;
- whether labels, tape or paper stickers must be removed;
- acceptable levels of dust, moisture and product residue;
- whether clear and coloured film must be separated;
- minimum pickup quantity and bale or bag requirements;
- how rejected loads are handled;
- what evidence of recovery is provided.
Obtain the specification in writing. “Recyclable” describes technical potential, not guaranteed collection from every Australian site.
Map where clean film is generated
Inbound pallet wrap removed at receiving may be cleaner than film from outdoor yards or production areas. Place collection points where staff unwrap pallets, before the film reaches mixed waste.
Use clear signage with real examples of accepted and rejected material. Keep strapping, corner board, shrink hoods, gloves and general rubbish out unless the recycler has approved them.
Keep it dry and compact
Water, food residue and grit add weight and reduce feedstock quality. Use covered collection containers and prevent loose film from blowing around the site.
Volume is another constraint. A recycler may recommend clear bags, stillages, compacting or baling once the quantity justifies equipment. Do not improvise compaction equipment; assess machinery, guarding and training requirements.
Measure the program honestly
Record kilograms collected, rejected material, pickup frequency and cost. Compare purchased film with recovered film cautiously: some material leaves with outbound freight, while cores, labels and contamination affect weight.
Australia’s 2023–24 plastics data reported a 16% recovery rate across all LDPE applications and a 39% recovery rate for business-to-business packaging across all polymers. Neither figure is specific to stretch film. In that report, national “recovery” also includes a small energy-recovery component, so it should not be read as a recycling rate. The figures show both opportunity and limitation; they do not prove that a particular roll will be recycled. See the Australian Government’s Plastics Flows and Fates reporting.
Reduce before relying on recycling
The first operational gain is often a validated reduction in film per pallet. Weigh completed wraps for each load family, check delivery performance and remove unnecessary revolutions without weakening containment. Avoid changing gauge on purchasing price alone.
Reusable pallet covers, straps or other systems may suit closed-loop lanes, but they require their own load and handling assessment. Stretch film still has a valid role where it protects freight and prevents product loss.
Be precise in customer claims
Prefer statements such as “collected separately and sent to our contracted commercial plastics recycler” when records support them. Avoid “100% recycled” if that describes collection rather than verified processing, and do not imply council kerbside acceptance.
Review the outlet at least annually and whenever the recycler changes its specification. Australian soft-plastics infrastructure is developing, so an old disposal instruction can quickly become misleading.
FAQ
Can pallet wrap go into the yellow-lid recycling bin?
Generally, flexible film should not be added unless the local service explicitly accepts it. Check the council or waste contractor’s current instructions.
Does the film need to be clean?
Commercial recyclers set their own limits, but dry, separated film with minimal labels and contamination is more useful feedstock. Follow the contracted specification.
Can black and clear film be mixed?
Only if the recycler accepts the mix. Colour separation may improve the value or end-use options of the recovered material.
Is recycled-content film automatically the best choice?
Not automatically. Confirm performance, recycled-content evidence, film usage per pallet and the available end-of-life route.
When buying manual stretch film, include storage, application rate and verified recovery in the procurement conversation—not just roll length and price.
Tags
Australia
Hand Stretch Film
Pallet Wrapping