How to Qualify a New Hand Stretch Film Supplier

A step-by-step Australian warehouse trial for qualifying a new hand stretch film supplier, product or production batch.

How to Qualify a New Hand Stretch Film Supplier article image

A new roll of hand stretch film may look identical to the approved product and still change the wrapping result. Resin blend, layer construction, cling, thickness tolerance, winding and core quality can affect how the film stretches and releases in an operator’s hands.

Switching every packing station on the strength of one demonstration pallet creates avoidable risk. A short, controlled qualification is faster than tracing unexplained breaks and loose loads after dispatch.

Define what must stay the same

List the load families, pallet types, wrap patterns, storage conditions and routes covered by the current approval. Record current film use per pallet, wrap time, break rate, tail failures, load movement and damage claims. Without a baseline, “worked well” is not a measurable result.

Ask the supplier to identify the exact product code, nominal dimensions, net film weight, core weight and relevant tolerances. Confirm whether future deliveries will come from the same specification and how material changes are communicated.

Screen the rolls before wrapping

Check packaging, roll edges, telescoping, core damage and obvious winding variation. Weigh a sample where roll yield matters. Store candidate and control rolls under the same conditions before testing so temperature history does not distort the comparison.

Do not use a single roll as evidence for a full shipment. Select samples across cartons or pallet positions and retain the batch details.

Run paired pallet trials

Wrap matched loads with the approved and candidate films. Keep the operator, pattern and measurement points consistent. Record breaks, neck-down, noise, cling, tail security, film weight used and wrapping time. Then move the pallets through normal forklift handling and a representative transport leg.

ASTM lists separate methods for stretch-film puncture, peel cling, elastic recovery, vibration, impact and applied-film performance. This is a useful reminder that no single property or micron figure represents the complete application. See the ASTM packaging standards index.

Set acceptance and stop rules

Agree beforehand what constitutes a failure: repeated film breaks, unsecured tails, unacceptable consumption, loss of containment or product damage. Define who can approve the change and what happens to unused candidate stock if it fails.

The NHVR notes that the number of wraps depends on product weight and friction and that film capacity should be known before it is relied upon in restraint calculations. Keep the trial tied to specific load families rather than approving one film for every pallet. See the NHVR stretch-wrapping guide.

Control the first production deliveries

After approval, monitor the first deliveries more closely and retain the supplier, product and batch identifiers. Train operators on any genuine difference in application, but do not normalise extra layers simply to make a marginal film pass.

A disciplined trial lets procurement compare the real cost of hand stretch film: material used, labour required and pallets accepted—not merely dollars per roll. It also gives dispatch a clear path back to the approved product if performance changes.

Tags

Related Articles

© 2026 Cline Plus, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account