How to Check Hand Stretch Film Containment Force
A practical Australian warehouse guide to checking hand stretch film containment force at the top, middle and base of a pallet.

A pallet can look tidy at dispatch and still arrive leaning. The missing control is often not another lap of film, but a repeatable way to check how firmly the completed wrap holds the load.
Containment force is the cumulative inward force created by all the film layers at a point on the pallet. It is more useful than simply counting revolutions because two operators can apply the same hand stretch film with very different tension and overlap.
Why visual inspection is not enough
Clear film makes it easy to see labels, corners and obvious tears. It does not show whether the base is firmly connected to the pallet or whether the top third can sway during braking and cornering.
A useful check separates three questions:
- Is the load stacked well enough to be unitised?
- Is the film intact and anchored without loose tails?
- Is holding force adequate at the base, middle and top?
Film cannot correct crushed cartons, overhang or a weak pallet. Fix those first.
Build a baseline from pallets that already travel well
There is no universal containment-force number for every load. Carton strength, product weight, pallet pattern, height, route and handling all change the requirement. A sensible starting point is a known load that has completed its normal freight route without movement or damage.
Wrap three representative pallets using the current method. After the film has settled, measure at consistent points near the base, middle and top. A purpose-made containment-force tool gives the most repeatable result. Record the film specification, operator, wrap pattern and readings.
The 3M pallet wrapping guideline likewise recommends checking three positions and treating containment force as a key shipment-performance indicator. Its values are examples, not automatic targets for a different product or route.
A simple warehouse trial
Use one load family at a time rather than mixing stable cartons with tall or irregular freight.
1. Select three normal pallets, not showcase-perfect samples. 2. Confirm the stack has no overhang, voids or damaged cartons. 3. Apply the documented wrap recipe. 4. Measure base, middle and top on the same long face. 5. Photograph the pallet and record the readings. 6. Recheck after a consistent settling period if pallets are stored before dispatch. 7. Link the result to delivery condition, movement, tears and customer claims.
ASTM D5415 describes a vibration method for comparing stretch films and wrap cycles, while warning that the result does not directly predict every field outcome. That is a useful discipline: a gauge reading supports a freight trial; it does not replace one. See the ASTM D5415 scope.
Diagnose an uneven result
Low force at the base often points to poor pallet lock, insufficient low-level revolutions or an operator easing tension while bending. Low force at the top may indicate too few shoulder wraps. A tight middle with weak top and bottom can still allow the load to rock.
Excessive force is not automatically safer. Light cartons, bottles and crush-sensitive products may distort before dispatch. The target is enough holding force for the specific load without damaging it.
Turn the result into a wrap standard
Document the parts an operator can reproduce: exact film, starting position, base revolutions, overlap, upward path, top revolutions, downward return and finish. Add a photo of the accepted pallet and state where force is checked.
When changing gauge, supplier or wrap pattern, compare finished-pallet performance rather than roll price alone. A thinner high-performance film may work well, but only if operators can apply it consistently to the tested standard.
FAQ
Is wrap count the same as containment force?
No. Wrap count is an input; containment force is an outcome. Film stretch, operator tension and overlap affect the result.
Should every pallet have the same target?
Usually not. Group pallets into practical load families and validate a standard for each family.
Can hand wrapping be measured consistently?
Yes, provided the measuring position, settling time and tool are kept consistent. Operator variation is precisely why measurement is useful.
For a new load, test the proposed manual pallet wrap on representative freight and keep the wrap recipe with the result.
Tags
Australia
Hand Stretch Film
Pallet Wrapping