Using Hand Stretch Film and Strapping on One Pallet
Understand how stretch film and strapping perform different jobs on Australian pallets and why their sequence, edges and testing matter.

Stretch film and strapping are often applied to the same pallet, but they do not do the same job. Film can unitise many small packages and contain loose surfaces. Strapping can provide concentrated restraint in defined directions. Combining them without a design may damage the film, crush cartons or create a false sense of security.
Assign a purpose to each material
Write down what the film is expected to control and what the straps are expected to control. If neither purpose can be described, the pack specification is probably relying on habit rather than evidence.
Hand stretch film may stabilise carton layers and connect a suitable load to the pallet. Straps may add vertical compression or secure specific rigid items, but their material, tension, joint and path need to suit the load.
Decide the application sequence
Straps applied beneath film remain visible only through the wrap and may create ridges that abrade it. Straps applied over film can cut or concentrate force at corners. There is no universal correct sequence; assess the package, edge protection, inspection needs and transport system.
Do not use stretched film as padding under a high-tension strap. Select corner or edge protection that spreads force over a suitable area and stays in position during handling.
Protect labels and access points
Keep required dangerous-goods marks, freight labels and receiving information visible. Confirm that straps do not cover barcodes and that film does not prevent checking strap joints. Maintain forklift entry and avoid loose strap tails or film tails.
Separate unitisation from vehicle restraint
The NHVR explains that stretch wrapping can form part of a load-restraint system only when it is sufficiently strong or layered for the required performance. Its guidance also shows that heavy loads may need additional restraint and warns about sharp rigid edges damaging wrap. See the NHVR stretch-wrapping guide.
Vehicle restraints still need to be designed for the load, vehicle and route. A tidy unit load is not automatically restrained to the vehicle.
Test the combined system
Record film specification, wrap pattern, strap type, count, position, tension and edge protection. Inspect after forklift handling and a representative route for strap movement, carton indentation, cut film and loss of containment.
The approved pack should name the combination, not merely list two consumables. A tested manual pallet film and strapping system gives operators a repeatable sequence and procurement a clear basis for substitution control.
Tags
Australia
Hand Stretch Film
Pallet Wrapping