Export Pallets: Stretch Film Does Not Replace ISPM 15
An Australian exporter’s guide to separating pallet unitisation with stretch film from ISPM 15 wood-packaging and destination requirements.

Wrapping an export pallet neatly does not make the timber underneath compliant. Stretch film controls the unit load; ISPM 15 addresses the biosecurity risk from raw wood packaging moving through international trade. They are separate requirements with different evidence.
Start with the destination
Confirm the importing country’s current conditions with the importer, freight forwarder and relevant authority before packing. Requirements can vary by destination, commodity and documentation pathway. A previous shipment is not proof that the next one will be accepted.
Australia’s Department of Agriculture, Fisheries and Forestry advises exporters using wood packaging for countries that have implemented ISPM 15 to ensure the packaging complies with the standard. The department also notes that exporters remain responsible for confirming importing-country requirements.
Check the wood packaging, not the film
ISPM 15 covers raw wood packaging such as pallets, dunnage, crates, packing blocks, drums, cases, spools and skids. Some processed wood products are outside its scope, but the material and destination conditions must be confirmed rather than guessed from appearance.
Under Australia’s wood-packaging certification scheme, only authorised participants can apply the internationally recognised ISPM 15 mark. Do not cover the mark with hand stretch film, labels or corner boards where it must remain available for inspection.
See the department’s wood packaging for export guidance and ISPM 15 export FAQ.
Do not alter a compliant pallet casually
DAFF states that marked wood packaging may be re-exported provided no alterations are made. Repaired, altered or remanufactured wood packaging can require work by certified providers. Replacing a broken board at the dispatch bench may therefore change more than the pallet’s strength.
Set an escalation route for damaged export pallets. Keep the load safe while the authorised packaging decision is made; do not wrap over damage and send it because the certification mark is still visible.
Build a two-part dispatch check
Use separate sign-offs:
-
Biosecurity/export: destination confirmed, packaging scope checked, required mark legible, alterations controlled and documents complete.
-
Unit load: product supported, pallet sound, wrap pattern approved, labels visible and transport restraint arranged.
The selected manual pallet wrap can unitise suitable packages and protect them from handling contamination. It cannot treat timber, authorise a certification mark or satisfy an importing country’s biosecurity conditions.
That distinction prevents a common export error: treating a well-presented pallet as a compliant pallet when the evidence belongs to the wood, the destination and the export process.
Tags
Australia
Hand Stretch Film
Pallet Wrapping