How to Check a Delivery of Hand Stretch Film

A receiving and trial checklist for Australian buyers checking hand stretch film dimensions, net film weight, cores and performance.

How to Check a Delivery of Hand Stretch Film article image

Two stretch-film rolls can share the same width and look identical on a warehouse shelf while delivering different usable film. Gross roll weight includes the cardboard core, and a quoted micron or length is only useful when the supplied product matches the agreed specification.

A practical receiving check protects both buyer and supplier. It does not require staff to reverse-engineer the film; it creates evidence when a shipment of hand stretch film behaves differently from the approved trial.

Write the purchase specification first

Record the details that matter to the operation:

  • hand-grade film and application method;
  • nominal width, length and thickness;
  • core internal diameter and any extended-core requirement;
  • colour, cling orientation and roll configuration;
  • net film weight or core weight where supplied;
  • rolls per carton and cartons per pallet;
  • batch identification and storage guidance;
  • tolerances stated by the manufacturer.

Do not copy a competitor’s tolerance or calculate an exact length from nominal density unless the supplier has agreed to that method. Resin formulation, manufacturing tolerance and measurement procedure matter.

Inspect cartons before opening them

Record crushed corners, water exposure, punctures and pallet movement. Roll-edge damage during freight can lead to repeated web tears later. Photograph damage at receipt and retain the delivery and batch details.

Select samples from more than one carton and pallet position. A single perfect top carton may not represent the delivery.

Separate gross weight from usable film

Weigh the unopened roll on a suitable calibrated scale, then compare it with the agreed gross range. Where the supplier provides core weight, net film weight can be checked after the roll is consumed:

`Net film weight = initial gross roll weight − empty core weight`

Use the same scale and method each time. Core moisture and construction may vary, so do not assume every unverified cardboard core has exactly the same weight.

Check fit and basic handling

Confirm the roll fits the approved dispenser and rotates without binding. Inspect width, core damage, telescoping, loose edges and visible contamination. Note unwind noise and cling, but avoid approving film from feel alone.

The real acceptance test is the finished pallet.

Run the approved pallet trial

Use the same load family, operator, dispenser and wrap recipe applied during supplier selection. Record:

  • roll weight before and after wrapping;
  • film breaks and roll-edge tears;
  • time to complete the pallet;
  • containment readings at standard positions;
  • finished dimensions and visible carton distortion;
  • results after the normal freight route.

A roll that costs less but requires more kilograms per accepted pallet may not be the better purchase. Conversely, a lower net roll weight does not prove under-supply if the agreed product has a different validated yield and specification.

Define when stock is quarantined

Agree on triggers such as widespread edge damage, wrong core size, missing batch identification or failed pallet performance. Keep suspect stock separated and labelled while the supplier investigates. Do not mix it into normal issue stock and then lose traceability.

Give the supplier measurements, photographs, batch numbers and trial conditions. “The film feels thin” is difficult to investigate; repeatable observations are useful.

FAQ

Is roll weight enough to compare suppliers?

No. It helps identify discrepancies, but pallet performance, usable film, core weight, breaks and application rate also matter.

Can we calculate exact metres from weight and micron?

Only with agreed material properties, tolerances and a validated method. Use the manufacturer’s specification and resolve discrepancies with the supplier.

Should every delivery be fully tested?

Set sampling according to risk, supplier history and internal quality controls. Increase checks after a change or complaint.

Keep an approved sample and test record for each manual stretch film specification used by the warehouse.

Tags

Related Articles

© 2026 Cline Plus, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account