How to Anchor Hand Stretch Film to a Pallet Base

Learn how to anchor hand stretch film to a pallet without relying on a loose tuck, unsafe reaching or an untested wrapping routine.

How to Anchor Hand Stretch Film to a Pallet Base article image

A neatly wrapped stack can still slide away from its pallet if the first passes only circle the cartons. Base anchoring is the connection between the load and the pallet—not merely a way to stop the film tail coming loose.

Start with access and pallet condition

Inspect the pallet before wrapping. Broken boards, protruding nails and splinters can cut film and injure an operator. Make sure there is enough clear floor space to walk around the load without stepping over stock, straps or pallet debris.

Avoid crawling under a raised load or reaching into forklift openings while equipment is operating nearby. Site traffic controls and the safe system of work take priority over any wrapping technique.

Capture the pallet deliberately

Apply the opening passes so part of the stretched web covers the lower product and part captures sound pallet structure. The National Heavy Vehicle Regulator specifically advises wrapping around the pallet at the base when unitising a load. Exactly how many circuits are required depends on the load, friction and verified wrapping system.

A twisted film rope can help start a roll in some procedures, but a bulky knot or loose tail may snag during handling. Whichever method is used, it should be documented, repeatable and compatible with the pallet design.

Check the connection

After applying hand stretch film, inspect all four sides:

  • the film remains connected to both load and pallet;
  • no sharp timber edge is cutting into the web;
  • forklift entry points remain usable;
  • the tail is secured beneath a sound film layer;
  • the stack does not move independently during the approved check.

Stretch wrapping unitises the goods, but it does not automatically provide the complete restraint required on a vehicle. NHVR guidance says wrapping should not be counted in a restraint calculation unless its capacity is known.

Train operators with a photograph of the approved base pattern for each regular pallet family. When trialling pallet stretch wrap, record the base passes separately from the total film used; otherwise a low-use result may hide a weak pallet connection.

FAQ

Can I simply tuck the film under the bottom carton?

A tuck may hold the starting tail but does not necessarily connect the load to the pallet.

Should film block the forklift openings?

No. Preserve safe fork access and check that loose film cannot snag on handling equipment.

Tags

Related Articles

© 2026 Cline Plus, Powered by Shopify

    • American Express
    • Apple Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account