How to Pack Mixed-Item Orders with Paper Void Fill
A practical Australian warehouse guide to separating, positioning and stabilising mixed-item eCommerce orders with paper void fill.

Mixed-item orders are difficult because the products can damage each other even when the outer carton arrives in good condition. A dense book, a small boxed cosmetic and a lightweight accessory do not respond to movement in the same way.
Start with the heaviest stable item
Place the heaviest product on a strong, stable base and keep it away from weaker items. Do not allow a dense product to sit above something crushable. Check that caps, pumps, glass faces and sharp corners are protected by their primary packaging before adding void fill.
Create separation, not just volume
Use formed paper void fill to prevent direct product-to-product contact. A paper divider or brace should remain in place when the carton is gently moved. If one item can work underneath or around another, revise the arrangement rather than adding loose paper on top.
Fill in a deliberate order
Build a base where required, position the heaviest item, add separation, place lighter products, block side movement and finish with top fill only if needed. Close the flaps without forcing them. Then carry out a gentle movement check in more than one direction.
Standardise common combinations
Identify frequent SKU pairings and photograph a successful pack. Record the carton, orientation and paper placement. This gives temporary staff a real reference and reduces the temptation to treat every mixed order as a new problem.
FAQ
Can paper void fill replace individual product wrapping? Not always. Delicate surfaces, liquids or fragile components may need primary protection before they enter the carton.
Should the heaviest item always go at the bottom? Usually it needs the most stable position, but orientation and product design still matter. Never load it onto a crushable product.
What if products have very different sizes? Consider a different carton, an internal divider or separate parcels if a safe configuration cannot be maintained. A paper dispenser improves access to material but does not solve an unsuitable carton layout.
Tags
Australia
Packaging Guides
Paper Void Fill